Dual AMD Opteron, 16GB DDR memory, 4 Gigabit Ethernet, 8-channel SATA II , Three PCI-X slots. SU-2S features AMD 64-bit Opteron processor with Hyper transport technologies to offer extreme wide data transfer. Marvell 88SX-6081 SATA II controller design-in accompanying with 3Gb data transfer rate as well as NCQ (Native Command Queue), greatly improves server performance in dealing with large amount of information transfering and frequent data access. Furthermore, on board four 64-bit Gigabit LAN and numerous DIMM sockets enhance system performance comprehensively. In a word, SU-2S is a powerful balanced server to fulfill variety computing, networking and storage service requests.
Features
Processor
- Support dual AMD Opteron 940-pin processor Chipset
- ULi M1563 & AMD-8131
- Supports Advanced Configuration and Power management Interface (ACPI)
Memory
- Eight 184-pin DIMM sockets
- Supports 144-bit wide dual channel DDR 400/333 memory
- Up to 16GB, ECC registered memory capacity
Graphics
- Onboard ATi Rage XL, default 8MB local memory (4MB optional)
Serial ATA
- 8 channel Serial ATAII, with 3Gb/s data transfer rate
(Marvell 88SX-6081)
- Or 4 channel Serial ATAII, with 3Gb/s data transfer rate (Marvell 88SX-6041)(optional)
System BIOS
- Supports Plug-and-Play (PNP)
- Supports Advanced Configuration Power Interface (ACPI)
- Write-Protect Anti-Virus function by AWARD BIOS
- 4MB flash ROM
LAN
- Broadcom 5704 dual ports 64-bit Gigabit Ethernet controller*2
Expansion Slot
- PCI-X*3,(3.3V)
- PCI*2, 32bit/33MHz (5V)
Internal I/O connectors
- 1 x Floppy port supports up to 2.88MB
- 2 x 40-pin IDE Ultra DMA 133/100/66/33 connector
- 1 x Com port header (COM2)
- 8 x Serial ATA connectors
- 1 x Printer port header
- 1 x USB 2.0 header (each header support 2 USB 2.0 devices)
- 1 x NIC-LED header
- 1 x FPIO SATA-LED header
- 1 x SM bus header (for SM bus and I2C)
Back Panel I/O
- 1 x PS/2 keyboard and mouse connector
- 1 x COM port (COM1)
- 1 x VGA port
- 1 x Dual USB 2.0 connector
- 2 x Dual RJ-45 w/ transformer LAN connector
Miscellaneous
- EEB 3.0 form factor (12”*13” - 305x330mm)
- Hardware monitoring – including fan speeds, voltages, system environment temperature
- Chassis intrusion detector
- 3.3V/ 5V 64-bit riser card supported (optional) |
