| AMDboard.com | home | best sellers | glossary | hardware | hot NEWS | links | OC | |
 |
 |
 |
 |
|
 |
|
|
|
|
|
| AMD Socket 939 Motherboard Special |
| All mentioned trademarks are property of their respective owners - © AMDboard.com 2001-2007 - Contact - Banners - Publisher - Privacy Policy - Submit news |
| Your best source for AMD Athlon 64, barebones, DDR, nForce2, nForce3, nForce4, motherboards, notebooks, Opteron, Sempron & Turion information |
|
 |
|
|
|
|
|
|
|
|
|
| Abit SV-1A |
 |
| - Supports AMD Athlon 64 939-pin processors - Supports Dual channel DDR 400/333 ECC up to 8GB capacity - Supports 2 port Gigabit Ethernet - Supports 10 ports Serial ATA - Supports PCI-X * 3, PCI *1 Features Processor - Support AMD Athlon 64 socket 939 processor Chipset - VIA K8T800 Pro + VIA VT8237 + VIA VPX II - Supports Advanced Configuration and Power management Interface (ACPI) Memory - Four 184-pin DIMM sockets - Supports 144-bit wide dual channel DDR 400/333 memory - Up to 8GB, un-buffered with ECC/Non-ECC memory capacity VGA - On board ATi Rage XL, default 8MB local memory (4MB optional) Serial ATA - 4 channel Serial ATAII 3 Gb/s data transfer rate (Marvell 88SX-6041) - Or 8 channel Serial ATAII 3 Gb/s data transfer rate (Marvell 88SX-6081) (optional) - 2 channel Serial ATA 1.5 Gb/s data transfer rate VIA VT8237 System BIOS - Support Plug-and-Play (PNP) - Support Advanced Configuration Power Interface (ACPI) - Write-Protect Anti-Virus function by AWARD BIOS - 4MB flash ROM LAN - Broadcom 5704 dual port 64-bit Gigabit Ethernet controller Expansion Slot - PCI-X*3, (3.3V) - PCI*1, 32bit/33MHz (5V) Internal I/O Connectors - 1 x Floppy port supports up to 2.88MB - 2 x 40-pin IDE Ultra DMA 133/100/66/33 connectors - 1 x Printer port header - 1 x COM port header (COM2) - 6 x Serial ATA connectors (4 port 88SX-6041, 2 port VIA-8237) - 1 x USB 2.0 header (each header support two USB 2.0 devices) - 1 x NIC-LED header - 1 x FPIO SATA-LED header - 1 x SM bus header (for SM bus and I2C) Back Panel I/O - 1 x PS/2 keyboard and mouse connector - 1 x Printer port (optional) - 1 x COM port (COM1) - 1 x VGA port - 1 x Dual USB 2.0 connector - 1 x Dual RJ-45 w/ transformer LAN connector Miscellaneous - ATX form factor (305x265mm) - Hardware monitoring – including fan speeds, voltages, system environment temperature - Chassis intrusion detector - 3.3V/ 5V riser card supported (optional) |
 |
 |
 |
|
 |
 |
|
|
 |
 |
| Hot Links |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |