| AMDboard.com | home | best sellers | glossary | hardware | hot NEWS | links | OC | |
 |
 |
 |
 |
|
 |
|
|
|
|
|
| AMD Opteron Motherboard Special |
| All mentioned trademarks are property of their respective owners - © AMDboard.com 2001-2005 - Contact - Banners - Publisher - Privacy Policy - Submit news |
| Your best source for AMD Athlon 64, barebones, DDR, nForce2, nForce3, nForce4, motherboards, notebooks, Opteron, Sempron & Turion information |
|
 |
|
|
|
|
|
|
|
|
|
 |
|
|
 |
| Hot Links |
| Tech Links |
 |
 |
| Red Hot! AMD Opteron 150 AMD Opteron 250 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Thunder K8WE (S2895) Dual Opteron PCI Express Workstation Motherboard |
| Processor • Dual µPGA 940-pin ZIF sockets • Two onboard 4-phase VRM • Supports up to two AMD Opteron 200 processors • Three HyperTransport links support up to 6.4GB/s data transfer rate each link • 144-bit DDR interface (128-bit data + 16 bit ECC) • Scalable 32bit & 64bit computing • Secure computing with Nx register support Chipset • AMD-8131HyperTransport PCI-X Tunnel • NVIDIA nForce Professional 2200 (CK8-04) • NVIDIA nForce Professional 2050 (I/O-4) - Connected to CPU 2 • SMsC Super I/O Memory • 128-bit dual channel (interleaved) memory bus • Total eight DDR DIMM sockets (four per CPU) • Supports up to 16GB of Registered DDR • Supports ECC with CHIPKILL Technology • Supports DDR 400 / 333 / 266 memory Expansion Slots (total of six usable slots) • Two x16 PCI Express FULL SPEED slots - Slot1 PCI-E x16 from nForce Prof. 2200 - Slot3 PCI-E x16 from nForce Prof. 2050 • Two independent 64-bit PCI-X buses - Slot 4 & 5: PCI-X 100 MHz max. (Bridge B) - Slot 6: PCI-X 133 MHz max. (Bridge A) • One 32-bit 33MHz PCI v2.3 (Slot 2) Integrated I/O • One floppy connector • One serial port connector and one 3pin custom serial header • Eight USB 2.0 EHCI ports (four rear connectors and four pin headers) • PS/2 mouse and keyboard connectors • Two FireWire (IEEE 1394a) ports (one rear connector and 1 internal pin header) System Management • Total of six 4-pin fan headers with PWM and tachometer monitoring • Temperature, voltage and fan monitoring Integrated ATA-133 • One ATA-133 IDE Channel for up to two devices |
| Integrated FireWire (IEEE 1394a) • TI TSB43AB22A IEEE 1394a PCI controller • Two FireWire ports (one rear connector and one internal pin header) Integrated Audio • Enhanced AC'97 2.3 compliant audio link • Analog Devices 1981B codec • Supports 5.1 Surround Sound • CD-in/Aux-in connectors Integrated SCSI Controller (option) • LSI 53C1030 U320 SCSI controller - Two U320 68-pin SCSI connectors - Connected to PCI-X Bridge B Integrated SATA II Controller • Two integrated dual port SATA II controllers • Four SATA connectors: up to four drives • Supports 3.0Gb/s per port • NvRAID v2.0 support • RAID 0, 1, 0 + 1 Integrated Secure Network Processor • Two IEEE 802.3 Nvidia MAC 1000/100/10 Ethernet (1st from nForce Professional 2200, 2nd from nForce Professional 2050) • Supports WOL and PXE • Supports Ethernet Jumbo Frames (9018 Bytes) • Full Duplex Gigabit Ethernet support BIOS • Phoenix BIOS on 8Mbit LPC Flash ROM • Supports ACPI 2.0 and SRAT • SMBIOS 2.3.1 BBS 1.1 Compliant • USB device boot • WOL and PXE support • 48-bit LBA Support Form Factor • SSI EEB v3.5 footprint (12"x13"; 304.8x330.2mm) • EPS12V/SSI 3.51 Workstation (24 + 8 + 6) power connectors (Split Plane design recommended) • Serial (one) connector • Two dual port USB 2.0 connectors (total 4 ports) • Stacked PS/2 keyboard and mouse connectors • Two RJ-45 LAN connectors with LEDs • Audio Line-in, Line-out, Mic-in jacks • One IEEE 1394a port Regulatory • FCC Class B (DoC) • European Community CE (DoC) Channel for up to two devices |