| |
 |
| AMDboard.com | home | best sellers | glossary | hardware | hot NEWS | links | OC | |
|
 |
 |
 |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
| Processors - Quad µPGA 940-pin ZIF sockets - Supports up to four AMD Opteron 800 series processors - Four onboard 3-phase VRMs - Integrated 128-bit DDR Memory Controller Chipset - AMD-8131 HyperTransport PCI-X Tunnel - AMD-8111 HyperTransport I/O Hub - Winbond W83627HF Super I/O chip - Total three Hardware Monitoring IC: (2) Analog Devices ADM1031 and (1) ADM1027 Memory - 128-bit dual channel memory bus - Total ten 184-pin 2.5-Volt DDR DIMM sockets (4 on CPU 0 and 2 each on CPU1, CPU2, CPU3 respectively) - Supports up to 20 GB Registered DDR - Supports ECC and ECC with Chipkill type memory modules - Supports PC1600, PC2100, & PC2700 DDR Expansion Slots - Two independent PCI-X buses - Two 64-bit 66/33 MHz (3.3-Volt) PCI-X slots from PCI-X bridge A - Two 64-bit 100/66/33 MHz (3.3-Volt) PCI-X slots from PCI-X bridge B - One legacy 32-bit 33MHz (5-Volt) PCI slot - Total of five usable slots Integrated I/O - One floppy connector supports up to two drives - Two 9-pin serial ports (one connector and one header) and One 25-pin parallel port connector - PS/2 mouse and keyboard connectors - Two USB v1.1 front panel headers - Two USB v2.0 connectors through VT6202 System Management - Total eleven 3-pin fan headers with tachometer monitoring - Four fan headers with (PWM) speed control - One 2-pin Chassis Intrusion header - Temperature, voltage and fan monitoring Integrated Enhanced IDE Controller - Provides two IDE dual-drive ports for up to four EIDE devices - Supports for UDMA 33/66/100/133 IDE drives and ATAPI compliant devices Integrated PCI Graphics - ATI Rage XL PCI graphics controller - 8MB Frame Buffer of video memory Integrated Serial ATA Controller (manufacturing option) - One Silicon Image SI3114 controllers - Four SATA 1.0 ports - Supports up Four SATA drives - Supports RAID 0,1,0+1 Integrated Dual Channel SCSI (manufacturing option) - LSI 53C1030 U320 SCSI controller - Dual-channel Ultra320 SCSI - Connects to PCI-X Bridge A - Supports LSI ZCR (Zero Channel RAID) Integrated LAN Controllers - Broadcom BCM5704C dual-channel Gigabit Ethernet controller ¤ Two RJ-45 LAN connectors with LEDs ¤ Connected to PCI-X Bridge A - Two Front Panel LED headers Intelligent Platform Management Interface Header - Tyan Server Management Daughter card (optional) supports features listed below via IPMI header - QLogic Zircon Baseboard Management Controller (BMC) based on powerful ARM7 tech. - Tailored for IPMI highest 1.5 Spec. - Supports KCS and BT styles - Flexible Windows and Linux based Management Solution - Supports RMCP and SNMP protocols - Supports ASF standard and EMP - I2C serial multi-master controllers and UARTs - Built-in IPMB connector - Remote power on/off and reset support (IPMI-over-LAN) BIOS - Phoenix BIOS version 4.0 - 4Mbit LPC Flash ROM - Watchdog timer - USB boot support - 48-bit LBA Support - Supports PXE via Ethernet - ACPI 2.0 & 1.0B support Form Factor - Extended ATX footprint (13” x 16” / 330.2mm x 406.4mm) - EPS12V power connectors - One serial port, one parallel port and one VGA connector - Stacked USB 2.0 (two) connectors - Stacked PS/2 keyboard and mouse connectors - Two RJ-45 side-by-side LAN connectors with LEDs Regulatory - FCC Class B (Declaration of Conformity) - European Community CE (Declaration of Conformity) |
 |
| All mentioned trademarks are property of their respective owners - © AMDboard.com 2001-2005 - Contact - Banners - Publisher - Privacy Policy - Submit news |
| Your best source for AMD Athlon 64, barebones, DDR, Duron, motherboards, nForce2, nForce3, nForce4, notebooks & Opteron information |
 |
| Published with... |
 |
 |
| ...and the draw |
| The gallery... |
 |
 |
|
|
| Thunder K8QS - S4880 Quad-Opteron Motherboard |
 |
| Opteron Motherboard Special |
| Red for new items |
 |
| See also the new Tyan K8QS Pro S4882 Here |
 |
 |
 |
 |
 |
 |
|
|
 |
| Hot Links |